Maintenance methods of stone plastic floor at different stages

(1) Cleaning and maintenance after the floor is laid/before use

1. First remove the dust and sundries on the floor surface.

2. Use a mop with 3M red abrasive discs or similar products to clean at low speed (diluted with a strong universal cleaner 1:20 diluted with water and added to the mop) to remove the protective wax, grease, dust and other dirt on the floor surface, Use a suction machine to suck up the sewage.

3. Rinse with clean water and dry.

4. Apply 1-2 layers of high-strength wax as needed.

Cleaner: Strong Universal Cleaner High Strength Facial Wax

Tools: Grinder, Red Grinder, Water Absorber, Wax Drag Water Press

(2) Daily cleaning and maintenance

1. Push or vacuum the dust. (Put the mop-pulling agent on the mop, and push the dust after drying.)

2. Wet mopping. (Dilute the floor cleaning and polishing agent with water at a ratio of 1:20, and mop the floor with a semi-wet mop.) If necessary, you can also use a floor mop with wash&shine for low-speed cleaning.

Cleaner: mopping agent, floor cleaning and polishing agent

Tool: Dust Push Mop

(3) Regular cleaning and maintenance

1. Push or vacuum the dust.

2. Dilute the floor cleaning and polishing agent with water at 1:20, mop the floor or cooperate with a high-speed polishing machine and add a red abrasive sheet for grinding and washing.

3. Apply 1-2 layers of high-strength face wax.

4. If necessary, it can be polished with a high-speed polishing machine and a white polishing pad.

Cleaner: Floor cleaning polisher high-strength wax

Tools: dust-push grinder, red and white grinder, water-absorber, wax-pull water press

(4) Thorough renovation

1. Push or vacuum the dust.

2. Dilute with 1:10 strong dewaxing water and spread it evenly on the ground, wait for 5-10 minutes, then clean and remove wax at low speed with a floor scrubber and a red abrasive sheet. Immediately suck up the sewage with a water suction machine.

3. Rinse with clean water and dry until there is no residual detergent left on the ground.

4. Apply 1-2 layers of high-strength wax as needed.

Cleaner: Floor cleaning polish, high-strength surface wax

Tools: dust-push grinder, red and white grinder, water-absorber, wax-pull water press

(5) Treatment of special dirt

1. Oil stains: For local oil stains, pour the water-based degreaser stock solution directly on the towel and wipe; for large-area oil stains, after diluting Vitex water-based degreaser at 1:10, use a mop and red abrasive disc to clean at low speed.

2. Black offset printing: Polish with spray cleaning wax, high-speed polishing machine and white polishing pad. For long-term black offset printing, you can directly pour the powerful black offset printing remover on the towel and wipe it.

3. Glue or chewing gum: Use a professional strong glue remover to directly pour it on a towel and wipe it off.

Cleaner: water-based degreaser spray cleaning maintenance wax strong black offset remover strong glue remover.