spc floor installation precautions

With the vigorous promotion of SPC flooring, its functionality has gradually been recognized and accepted by consumers. However, since SPC flooring is a new material and new technology, when the market demand increases, professional installation technicians have become in short supply. However, ordinary consumers cannot complete the installation of SPC floors without professional training and guidance. In order to give full play to the superior performance of SPC floor, the precautions for installation of SPC floor will now be explained.
spc floor installation requirements
1. Flatness: Whether the flatness of the basic ground is qualified or not directly determines whether the SPC floor can be used or not. Therefore, when deciding to use the SPC floor, the original ground must be leveled (terrazzo, ceramic tiles, floor paint, etc. can be directly laid), The ground height difference is controlled within 2mm.
2. Indoor temperature: SPC floor is suitable for indoor environment, not suitable for outdoor environment of exposure and driving. After the floor is delivered to the site, it should be placed for 24 hours before installation and construction.

spc floor installation precautions
SPC floor should be installed and constructed by professional construction personnel to avoid losses caused by improper operation. The following are the precautions for spc floor installation:

1. Floor mats: It is recommended to use 1.5mm-2.0mm floor mats, and it is forbidden to use floor mats or floor mats over 2.0mm. The base layer is too soft, which is easy to cause the lock to break and trip.
2. Installation: Install the short side first and then the long side when the thickness is below 4.0mm, and install the SPC floor with thickness above 4.0mm first on the long side and then the short side.
3. Cutting: SPC floors with a thickness of less than 4.0mm can use a paper cutter, and SPC floors with a thickness of more than 4.0mm should use a dust-free saw.
4. Accessories: The accessories of SPC floor (skirting, beading) can be used in general with those of wooden floor.
5. Use: SPC floor does not need special maintenance, just daily cleaning. However, it is forbidden to use steel balls and blades for scratching.

The above are the matters needing attention during the installation of spc floor. In fact, the installation method of spc floor is much simpler than that of traditional wooden floor. As long as you pay attention to the above points, the paving effect can basically be guaranteed.